A stylish and attractive window enhances the beauty of the house as long as the window tracks are clean. Window tracks are a place that gets filled with grime and debris quite frequently and needs to be cleaned regularly.
Like window track there are others serious window repair problems. If you face any of them contact window repair columbus ohio for any kind of window repair problem.
Dirty window tracks are bad for your house too. Whenever you are trying to enjoy the chilling air by opening the window, the dust can just flow inside your house causing more trouble. So, it’s very important to keep those clean.
Unfortunately, window tracks are an awkward place to put your hands through, and cleaning them regularly can be a real pain. So, in this article, I am going to talk about the easiest and simplest ways of cleaning window tracks.
Things you will need:
- Baking soda
- Spray bottle
- Old toothbrush
- Paper towel
- Knife and spoon
Step 1: Sprinkle baking soda
After you have marked the places with dust, take a spoon and sprinkle baking soda all over the dirty places. Most people forget about the nooks and crannies while doing that. But you should know that’s where you can find most of the dirt!
Step 2: Spray mixture
After you are done with sprinkling baking soda, take equal amounts of water and vinegar to mix and put them inside a spray bottle. After that, spray the solution on the baking soda covering all the window tracks.
You will have to wait for 5-10 minutes for the mixture to bubble up.
Step 3: Use a toothbrush to scrub the tracks
In this part, you should take an old toothbrush and start scrubbing the window tracks. By doing that, the small bristles will come into the corner making it easier to take out the dirt while the baking soda and vinegar solution will make your window as shiny as new.
Step 4: Remove the leftover gunk
Your toothbrush should do most of the work. But there are some places, where you can’t put your toothbrush through and that’s where you need a toothpick.
Step 5: Wipe down
Use it to get to the right places and dig out the leftover dirt and greases. After that, give a last wipe down with a wet rag or paper towel.
You can also clean the dust from window tracks using a vacuum cleaner. It can be a handful to suck out the dirt and easy removal. However, you should still wipe out the place with a rag to avoid muddy tracks.
Garment streaming can be another way of getting rid of the dirt. However, this one is a little bit tricky and requires a lot of patience. You have to careful to not clean it while the windows are still cold or in steam temperature. This can lead to the window being cracked. Also, avoid streaming window tracks that are made of finished wood or the surface is polished, just painted or waxed.
To apply this technique, you will need a garment streamer, a vacuum with a crevice tool, microfiber cloths, and distilled water.
Put the garment streamer to heat while you use the vacuum to suck out dust as much as you can. After the streamer is ready, break up the stubborn dirt using it. Then you can wipe out the leftover debris with the microfiber cloth. That’s it!
If you feel like there’s still dirt left, you can repeat the whole process 2-3 times until you are satisfied.
Cleaning the window tracks is very important for a neat and healthy house. If you keep regular maintenance, your window tracks shouldn’t take more than two cleanings per year. This makes the process much easier and allows us to enjoy fresh air without worrying about the dirt.
Most people think that the dirt only gathers in the horizontal window tracks. But you should keep the vertical ones in mind too to get the best results.
Besides the yearly cleaning, you can use a small cloth or rag to clean the tracks on a regular basis to avoid too much debris at a time. This is ought to make your yearly job a lot faster.
Too much dust can cause permanent damage to your window forcing you to have a replacement. So, you better clean them regularly!