You can’t deny the fact that wood rot is a part of your regular life. No matter how hard you try, some things can’t be protected forever. Wood windows is one of them. Often they are seen getting damaged from rain, humidity, and many other natural causes. Therefore, you must have some preventive measures written on how to fix them. In this article, we are going to briefly see some measures you can take to repair your rotten wood window frame.
Your rotten window frames can be fixed with a wood compatible epoxy adhesive, applied in two steps. Here are some tools that are required to fix your rotten window frame as a DIY project:
- Epoxy Wood Consolidant
- Epoxy Wood Filler
Step 1: Determine
It’s good to inspect and determine what to do on the first step. Sometimes, the damage is severe and it cannot be repaired, so it is better to see if it is repairable at all. When the rain or humidity has caused enough problems, maybe it has to be replaced.
If there is a 12-15% damage in the frame, you may want to consider replacing them. Vinyl woods are great for frames since they last longer than other woods. You will be also relieved to hear the pricing.
Step 2: Remove the Damaged Portion
In this step, you have to use your chisel, screwdriver, and brush to remove the part that is rotten. Window frames are crucial while removing, so be careful. Generally, it is done by scraping until the healthy parts underneath are visible. Use your brush after scraping to remove the rubble.
Step 3: Drilling Holes
After you have successfully removed the rotten wood, it’s time to drill holes into the wood that are not damaged. Keep an inch of space between every hole. The even spacing is essential to increase the hold.
Step 4: Apply Epoxy Consolidant and Filler
Done with drilling holes? Now it’s time to cover them by applying the epoxy consolidant. Leave it for 10 minutes until it dries. The wood will absorb the epoxy in the meantime.
The second layer of epoxy shall be applied now.
When you apply the filler, the window frame shall return to its original dimensions. If there is a portion coming out of it, scrape it out. You can use a knife that you have in handy.
Step 5: Apply Paint
Before applying the paint, you can use rough-grit sandpaper to level the hardened epoxy, otherwise, it would look bad. Remove the dust and wipe away the debris and apply the paint. Exterior paint is a good option for window repair.
Go for Professional Help
For window repair or Skip Hire South Dublin, you may want to consider professional help before going through all the hassle all by yourself. Services like window repair, skips, door repair, plumbing can be crucial at times that get even worse sometimes when you go to try them. Therefore, a professional service provider is a lifesaver in this case.